LED Lamp Types

Sharing is caring!

These lamps are low voltage (LV = 12V) or network (UK MV = 230-240V). Most premium LED (led lampor) lights are also dimmable and are suitable for most dimming systems and can be easily replaced.

Medium voltage lamp:

Lamps with the following pedestals (or sockets) are typically operated directly at 230-240V AC (UK) supply voltage:

  • SES, E14 and E27 are related to the type of screw cap. SES stands for small Edison screws, the same as the E14 socket (ie base diameter or 14 mm), usually used for spider-shaped devices. The E27 socket is an Edison half-screw with a base diameter of 27 mm and is typically used for table lamps, GLS suspension or PAR accessories.
  • B15 and B22 refer to the type of bayonet socket. The B15 plug (ie base diameter or 15 mm) is usually located in a spider-shaped fitting. The socket B22 with a base diameter of 22 mm is usually used in table lamps or GLS suspensions.
  • GX53 and GU10 bases.

Low voltage light:

The low voltage lamp (lamp) is usually connected to a transformer (or controller) to reduce the line voltage to 12 V DC. Fortunately, there is no need to touch the transformer when replacing the lamp. High quality 12V LED lamps are compatible with most halogen transformers and can be easily adapted. The number of lamps that can be used in a transformer depends on the total power of the lamp, which must be less than the total capacity of the transformer.

Lamps with the following pedestals operate at low voltage, 12 VDC:

  • Base GU5.3: Usually used for MR16 lamps.
  • Base GU4: Usually used by MR11 lamps or capsules.
  • Base G53: Usually used by the AR111 lamp.

Color temperature:

Lamps and tubes usually have various color temperatures: the higher the color temperature, the colder the white light. The color temperature of daylight is very high (more than 5,500 K). LED lamps typically range from 2700K to 4200K. LED lamps (led lampor) typically range from 4,000 to 6,500 km.

The choice of color temperature may depend on the type of environment or atmosphere you prefer:

2700K = warm white (white yellow): for residential or reception areas that require intimacy

3000 K = neutral white (light white tone)

4000 K + = cool white (white plus blue)

6,500 K = daylight: fluorescent tube for replacement of utility space

Beam Angles

LED lights are typically affected by one or more light emitting diodes on the chip. Light is dispersed to mimic a traditional incandescent or halogen source using a composite lens. LED downlights typically have multiple beam angle options to simulate the light scattering of a halogen reflector. The choice of beam angle depends on the application and the height of the roof. Narrow beams are often used for emphasis, product or screen lighting, or ceilings, and beams have more room to disperse. Wide beams tend to be used for general illumination in distributed rooms, or when the ceiling is low and the beam has less space to disperse.

Beam angles range from 15 degrees to 60 degrees, but the options depend on the lamp model. Living spaces typically have a radiation angle of 24 degrees or greater. Typically, consumers can expect to see the return on their energy bills within 2 years, so you must wait and see the final retail price to confirm the calculation.

Reducing labor legislation to change failed incandescent bulbs in a major commercial operation will result in the market developing in a short period of time. The standard lamp has a life of about 1000 hours and an LED of about 50,000 hours. Business leaders will soon find that the calculations are very positive.

In short, I don’t know how long it took us to see that a LED battery is powered by, you need light, but don’t want a really viable suggestion for wiring or a really uncomfortable area.

shares